Clarion Infotech | Road design and estimation software's

Who We Are

Roads are the arteries of the nation. They play an invaluable role in the Development of the nation. Infrastructural development in turn leads to the industrial growth along with the convenient mode of transportation. Eyeing this need of hour, Clarion Infotech is contineously working in this field. Our efforts are to provide easy, accurate and affordable solutions in the form of Softwares and Consultancy. Quanta+, Estiq and Plannal are our crown software products for designing, estimating and billing of the road projects. Though it evolves Graphical interface, we are successful to eliminate the CAD operativity. This provides the user the luxury to operate the software without knowing the CAD. We are also in the field of Project Management Consultancy for the Infrastructure projects.

About Us

With the mission "From Complexity to simplicity with speed and accuracy", we have started 'Clarion Infotech' in 1996. Our first product 'Road Designer' has penetrated successfully in almost all states of INDIA. Our client base was started as contractors, consultants but then extended to Govt departments such as Public Works Department, National Highways, Pradhan Mantri Gram Sadak Yojana, Mukhya Mantri Gram Sadak Yojana, Municipal Corporations and so on.

We have very good fleet of Engineers who are continuously deriving their skills as requirement studies, analysis and design. In addition to them, we also have pool of Free lance Consultants who are involved in Research And Development of the product and services.

Our sister concern firm, 'Clarion Consultants' is providing Project Management consultancy services in the field of Roads, Bridges, Railways, GIS mapping etc.

What We have

Specification Reports Demo Tutorial

This software covers all the aspect of quantity estimation with great simplicity in following operational features with Auto level Data as input

Non Cad based Software
Field book & Reduced level input,
Two layer, Multiple layer cross section with data import for each layer,
Cross section generation with the help of wizard module,
Template facility for typical cross-section, placement of median & retaining wall,
Cross sectional & surface area, strata classification area,
Grade finalization of Road & gutter, camber correction with profile correction,
Generation of L-section at any specified distance,
Graphical Editing Facility for Cross section & L-section,
Reports such as Area report, Volume report, Thickness Report, level Report, Toe point report, Lead Report, Field Book generation report, Dynamic report, To the scale Cross-section & L-section Reports,
Multiple Graph printing.

I/P data format 1: This input Data format to the software is the reduced Levels.

I/P data format 2 :This input format is as per field book data.

Cross-section of existing road : This window shows graphical representation of existing road cross section with levels of all layers.

L-section : This window shows L-section of various layers with its levels.

Wizard window : With the help of wizard method we can prepare any type of road without knowing procedure of preparation of road in software.

Area abstract report : This report consist of chainage, left and right side cutting-filling areas, total & cumulative cutting & filling areas.

Area details report : In these report elaborates calculations details of area for each chainage by trapezoidal method.

Volume report : This report shows the quantity of all chainages.

Grade point report : This report displays the gradient with check as per IRC specifications.

Qantity utilisation report : In this report we can finalise utilisation of cutting quantity for filling with specified leads.

Detail of lead report : This report consist of quantity from various leads and borrow pit (quarry).

Field book report : This report generates field book from reduce levels with the help of BS and FS values or from staff reading.

Dynamic report : This report is dynamically generated as per the required report format.

Cross-section printing : This module is for printing of Cross â€“section printing with levels of various layers, area abstract, area details, header. footer etc. by using various templates.

L-section printing : This module is for printing of L section with levels of various layers, grade, thickness etc.

Login to watch Tutorials

login To Watch Tutorials	Demo Estique
login To Watch Tutorials	Tutorial
login To Watch Tutorials	Demo

Specification Reports Demo Tutorials

This is the advanced tool for the quantity estimation with Total Station data input along with Auto Level Data

Non Cad based Software

Total Station data input

Alignment Finalization

Alignment finalization by three methods, also you can edit, delete, change the direction of alignment.

i. Alignment by Point Code
ii. Alignment by Polyline
iii. Alignment by Layout

DTM surface generation

You can generate 3D surface (Digital Terrain Module) generation using points groups by triangular method.

C/s data output.

Conversion of Total station data (point co-ordinate i.e. X,Y,Z) into Cross section data.
You can convert the data by two methods
- i. By user defined
  In this method, user can directly mention Chainage interval & Left Right offset of Cross section for generate report.
- ii.By surveyed chainages
  
  In this method, Cross section data (Chainges & offsets of Left & Right side) generate according to surveyed data actual taken from site.

Along with these special features, all features in Quanta Plus Software are also available for Quantity Estimation.

Field book & Reduced level input
Two layer, Multiple layer cross section with data import for each layer
Cross section generation with the help of wizard module
Template facility for typical cross-section, placement of median & retaining wall
Cross sectional & surface area, strata classification area
Grade finalization of Road & gutter, camber correction with profile correction
Generation of L-section at any specified distance
Graphical Editing Facility for Cross section & L-section
Reports such as Area report, Volume report, Thickness Report, level Report, Toe point report, Lead Report, Field Book generation report, Dynamic report, To the scale Cross-section & L-section Reports
Multiple Graph printing.

I/P data format 1 : This input Data format to the software is the reduced Levels.

I/P data format 2 : This input format is as per total station data including point id., northing, easting, levels and code.

I/P data format 3 : This input format is as per field book data.

Cross section of existing road : This window shows graphical representation of existing road X-section with levels of all layers.

L-section : This window shows L-section of various layers with its levels.

Wizard window : With the help of wizard method we can prepare any type of road without knowing procedure of preparation of road in software.

Area abstract report : This report consist of chainage, left and right side cutting-filling areas, total & cumulative cutting & filling areas.

Area details report : In these report elaborates calculations details of area for each chainage by trapezoidal method.

Volume report : This report shows the quantity of all chainages.

Field book report : This report gives field book from reduce levels with the help of BS and FS values or from staff reading.

Quantity utilisation report : In this report we can finalise utilisation of road work cutting quantity with specified lead.

Detail of lead report : This report consist of quantity from various leads and borrow pit (quarry).

Dynamic report : This report is dynamically generated as per the required report format.

Cross-section printing : This module is for printing of Cross â€“section printing with levels of various layers, area abstract, area details, header. footer etc. by using various templates.

L-section printing : This module is for printing of L section with levels of various layers, grade, thickness etc.

Login to watch Tutorials

login To Watch Tutorials	Estique
login To Watch Tutorials	Demo Estique
login To Watch Tutorials	Estique

Specification Reports Demo Tutorials Design

LiDAR data input

LiDAR data in the form of Nothing, Easting & Level(MSL) can be imported

Total Station data input

CSV, DXF & Excel format can import,

Creation of Point Groups from imported points

You can change style & size of various points having same code.
Point groups created using same level or By Selection of code or by point Id.
You can draw poly line using various points

Alignment Finalization

Alignment finalization by three methods, also you can edit, delete, change the direction of alignment.

i.Alignment by Code

In this method alignment has drawn using code selection with providing starting point of alignment.

ii.Alignment by Polyline

In this method already drawn poly line is converted into alignment

iii. Alignment by Layout

In this method you can draw alignment by selecting points (just like draw poly line)

Horizontal Curve Finalization

Horizontal Curve finalization done by IRC method according to design speed of road by two methods,

i. Circular Curve method
ii. Transition with circular curve

DTM surface generation

You can generate 3D surface (Digital Terrain Module) generation using points groups by triangular method.
You can regenerate surface using point groups, can delete it.

Plan Finalization

Object placement, CD work location, showing various widths of roads etc Divide plan in number of sheets for plotting

Reports such as C/s Data output, Shift between Alignment & curve, Super elevation report etc

Alignment finalization by three methods, also you can edit, delete, change the direction of alignment.

C/s data output.

Conversion of Total station data (point co-ordinate i.e. X,Y,Z) into Cross section data.
You can convert by two methods
- i. By user defined
- ii.By surveyed chainages

Estimate

Non Cad based Software
Field book & Reduced level input
Two layer, Multiple layer cross section with data import for each layer
Cross section generation with the help of wizard module
Template facility for typical cross-section, placement of median & retaining wall
Cross sectional & surface area, strata classification area
Grade finalization of Road & gutter, camber correction with profile correction
Generation of L-section at any specified distance
Graphical Editing Facility for Cross section & L-section
Reports such as Area report, Volume report, Thickness Report, level Report, Toe point report, Lead Report, Field Book generation report, Dynamic report, To the scale Cross-section & L-section Reports
Multiple Graph printing.

I/P data format 1 : This input format is as per total station data including point id., northing, easting, levels and code.

I/P data format 2 : This input format consist chainage and its bearing angle.

Plan view : We can prepare plan consist of existing and proposed width of road, objects, CD work details etc.

Curve details : This report consists of vertex chainage, tangent length, radius, apex distance, deflection angle and curve length.

Curve list : This shows curve list with various parameter of curves.

Surface generation : We can generate 3D surface (Digital Terrain Model) using point groups by triangular method.

Plan printing : We can print prepared plan directly or save it to auto CAD.

X-section data output : This report shows X-sectional data including chainage, distance and reduces levels. It is generated from total station data.

Cross section of existing road : This window shows graphical representation of existing road X-section with levels of all layers.

L-section : This window shows L-section of various layers with its levels.

Area abstract report : This report consist of chainage, left and right side cutting-filling areas, total & cumulative cutting & filling areas.

Area details report: In these report elaborates calculations details of area for each chainage by trapezoidal method.

Volume report : In this report quantity of all chainages shown.

Quantity utilisation report : In this report we can finalised utilisation of road work cutting quantity for each chainage and specify lead.

Field book report : This report gives field book from reduce levels with the help of BS and FS values or from staff reading.

Dynamic report : This report is dynamically generated including levels, area, quantity etc.

Cross section printing : This module is for printing of Cross â€“section printing with levels of various layers, area abstract, area details, header. footer etc. by using various templates.